EZ zip (zipper threader)

 7,20

Zipper threading aid

With this tool, threading pull onto your zipper by the yard is child’s play!
Super easy to install on your tabletop and suited for both #5 and #3 zippers (and also suited for metal zippers!)

586 in stock

EZ zip (zipper threader)  7,20

We offer professional advice when you are stuck while making your choice.
Add a note to your order when you want us to look at something.
We are bagmakers, just like you, and like to think along with you.

SKU: 660-10 Categories: , Tag:
Weight: 55g

How to install:

You slide the EZ zip over the edge of a table top and insert the zipper / slider into the slot on the top.
Yep that’s it. No screws to adjust or anything else. It’s suitable for table tops of a thickness between 1 and 4cm (⅜” and 1 ⅝”). No camp, no screws, so no damage on your table. It’s as quickly to remove from your table as to add it to a new place. The spring on the bottom side holds the tool in place.

How to use:

Place your zipperhead with the rounded edge forward onto the slit of the EZ zip. The top part (the dangling puller) is downwards, and the flat bottom of the pull is towards the top.

Thread the two halves of the zipper into the zipper at the same time, forming a 90 ° angle. Use both hands to pull the zipper backwards and through the zipper evenly.

All our zippers are 2-way nylon coil zipper tape with electroplated metal finish

Zipper width:
  • #5 = 1¼ inches (3 cm).
  • #3 = 1 inch (2,5cm)
Conversion:
  • One meter: 40 inches.

We are excited to offer pre-cut zipper packages of one, three, five, or ten meters of your favorite zipper colors.  Enough for multiple projects!

These packages are only zipper tape with no pulls. This gives you more creative options to pick your favorite zipper pulls to personalize your sewing projects. If your project needs two pulls positioned head-to-head, order enough zipper pulls. Head-to-head zipper pulls are ideal for backpacks, luggage, and any bag you want to open as wide as possible.

With coil zipper by the yard, it is so easy to customize the length and pulls for your projects. Both size zippers can be sewn with a domestic machine. The teeth may look like metal but are nylon, so you can easily sew over each end!

MM Appr Size In Inches Exact Size In Inches
1mm 1/25 Inch 0.03937 Inches
2mm 1/16 Inch 0.07874 Inches
3mm 3/32 Inch 0.11811 Inches
4mm 1/8 Inch 0.15748 Inches
5mm 3/16 Inch 0.19685 Inches
6mm Just short of 1/4 Inch 0.23622 Inches
7mm Little over 1/4 Inch 0.27559 Inches
8mm 5/16 Inch 0.31496 Inches
9mm Just short of 3/8 Inch 0.35433 Inches
10mm Little over 3/8 Inch 0.39370 Inches
11mm 7/16 Inch 0.43307 Inches
12mm Just short of 1/2 Inch 0.47244 Inches
13mm Little over 1/2 Inch 0.51181 Inches
14mm 9/16 Inch 0.55118 Inches
15mm Just short of 5/8 Inch 0.59055 Inches
16mm 5/8 Inch 0.62992 Inches
17mm Just short of 11/16 Inch 0.66929 Inches
18mm Just short of 3/4 Inch 0.70866 Inches
19mm Little under 3/4 Inch 0.74803 Inches
20mm Just short of 13/16 Inch 0.78740 Inches
21mm Little over 13/16 Inch 0.82677 Inches
22mm Just short of 7/8 Inch 0.86614 Inches
23mm Little over 7/8 Inch 0.90551 Inches
24mm 15/16 Inch 0.94488 Inches
25mm 1 Inch 0.98425 Inches

Reviews

There are no reviews yet.

Be the first to review “EZ zip (zipper threader)”

Your email address will not be published. Required fields are marked *