INSTALLATION: Easy to install. Use a regular small cross screw driver.
Slide over the edge of your wallet or clutch. If the fabric is too thick, press it down with pliers or compress down with a rubber mallet.
Always start the holes with an awl and only then screw in screws.
You can use a thread locking liquid or glue to secure the screws, and some glue to adhere the metal pieces.
- Width at widest: ½” or 12 mm
- Total Length including ring: 1 ¾” or 44 mm
- Channel gap (width of opening): 3/16″ or 4 mm
- The fabric must be able to compress to 3/16″ (4 mm) for the clip to slide on.